Below is a list of lab reactor systems for process chemistry and products across ALL our Product Ranges. To filter this list, click on one of the Product Ranges on the left.

.
BioVIS
BioVIS

Real-Time Total Cell Density & Biomass Monitoring Probe

Read more
.
Magellan Biotech (CO2 and O2) Gas Analysers
Magellan Biotech (CO2 and O2) Gas Analysers

The Tandem is now the affordable industry standard for dedicated CO2 and O2 exhaust gas analysis, for all laboratory, scale-up and commercial production applications

Read more
.
FlowCAT SA // Semi Automated (SA) Flow Reactor
FlowCAT SA // Semi Automated (SA) Flow Reactor

The FlowCAT SA - This affordable semi- automated (SA) delivers high pressure flow chemistry catalytic reactions in a compact, bench top unit, ideal for Hydrogenation, Carbonylation or other high-pressure chemistry.

Read more
.
BioXplorer 100
BioXplorer 100

The Mini-Bioreactor System For Rapid Parallel Bioprocessing.
Offers rapid screening and evaluation of a wide range of fermentation conditions and cell line/strain development

Read more
.
BioXplorer 400
BioXplorer 400

The Mini-Bioreactor System For Parallel Bioprocessing & Optimisation.
Obtain a greater understanding of all process parameters at working volumes from 50 ml to 400 ml

Read more
.
BioXplorer 5000
BioXplorer 5000

The ideal system for the production of high-yield microbial & mammalian cell cultures with high-pressure options.
For working volumes between 400 ml and 5 L

Read more
.
PolyBLOCK // Parallel Chemistry Reaction Block
PolyBLOCK // Parallel Chemistry Reaction Block

A compact, flexible, economic reaction block, with 4 or 8 reaction zones - each independently controlled and monitored. Vessels range from 1 to 500ml. Stirring & Temperature can be monitored and controlled in real-time using HEL's WinISO control software.

Read more
.
AutoMATE // Parallel Chemistry on a linear platform.
AutoMATE // Parallel Chemistry on a linear platform.

Chemistry platforms with independently controlled zones, offering both high and low pressure solutions. Options of 2, 4, 6 or 8 zones available, with the facility to mix and match different reactors/vials with low & high pressure. An endlessly flexible platform supporting activities from screening to process optimisation and scale-up.

Read more
.
AutoLAB digi-plate // Stirred lab reactors from 1mL to 1L
AutoLAB digi-plate // Stirred lab reactors from 1mL to 1L

Using familiar stirred hotplate with touchscreen controls and a wide choice of reaction vessels, busy chemists can rely on the AutoLAB digi-plate for reproducible results.

Read more
.
AutoLAB Flex // Research Reactors from 100mL to 5L
AutoLAB Flex // Research Reactors from 100mL to 5L

HEL's entry level bench reactor - designed for ease of use, flexibility and economy.  An innovative and expandable research reactor system, the AutoLAB Flex is backed up by 25 years experience in high quality reactor design.

Read more
.
AutoLAB // Chemical Reactors, from 250mL to 20L
AutoLAB // Chemical Reactors, from 250mL to 20L

AutoLABs are supplied with stirring and thermal control as standard with a range of Feeds, Probes and PAT options. The system has been designed by chemists with flexibility and ease-of-use uppermost in mind. HEL have been producing jacketed reactors for over two decades - partnering the best components with HEL's intuitive WinISO control software.

Read more
.
HP ChemSCAN // Automated Catalyst Screening And Process Development
HP ChemSCAN // Automated Catalyst Screening And Process Development

This is a highly automated platform that allows parallel screening of catalytic reactions. Each sample can be at a different temperature and pressure and the reaction process (in term of gas consumption) is tracked in real time which provides information on reaction kinetics. Pressure of 200bar and temperature up to 250C is possible.

Read more
.
FlowCAT // High-Pressure Flow-Chemistry in a compact unit
FlowCAT // High-Pressure Flow-Chemistry in a compact unit

The FlowCAT delivers high pressure flow chemistry catalytic reactions in a compact, bench top unit, ideal for Hydrogenation, Carbonylation or other high-pressure chemistry. The system has the flexibility to deal with homogenous and heterogeneous chemistry in the same unit and can incorporate a combination of gas and liquid feeds.

Read more
.
CrystalSCAN // Automated Crystallisation Screening system
CrystalSCAN // Automated Crystallisation Screening system

The CrystalSCAN is a versatile automated platform for determining Solubility and Meta-Stable Zone Width (MSZW), in multiple, parallel samples. With precise temperature-control and integrated dilution pumps, the system allows for the investigation over a wide concentration and temperature range.

Read more
.
CATalyst Screening  Choice of Multi-sample Manual Systems
CATalyst Screening Choice of Multi-sample Manual Systems

Several products (CAT 7, 18, 24, 96, polyCAT) are offered under manual control, with samples all at the same temperature and pressure. The PolyCAT allows some degree of automation and ability to vary temperature and pressure among samples. The simplicity of design enables competitive pricing.

 

Read more
.
HP AutoLAB // High-Pressure Reactor Platform
HP AutoLAB // High-Pressure Reactor Platform

Available for both Batch & Continuous modes, with applications such as Hydrogenation, Carbonylation & Polymerisation. Configurable with features for monitoring and control of a wide range of features the HP AutoLAB range is available in as many shapes and configurations as there are applications. Designed by chemists for chemists, with flexibility and user ease-of-use uppermost in mind.

Read more
.
HP PolyBLOCK // Parallel High-Pressure Chemistry Block
HP PolyBLOCK // Parallel High-Pressure Chemistry Block

The High Pressure PolyBLOCK is a 4 or 8 zone reactor block, with independent Pressure and Temperature monitoring & control. The system has been designed for both Process Development and High-Pressure/High-Throughput work. A range of parallel reactors are available from 1 to 400mL rated to 100Bar as standard.

Read more
.
HP AutoMATE // Parallel High-Pressure Chemistry
HP AutoMATE // Parallel High-Pressure Chemistry

With volumes of 16ml to 400ml and pressure of 200bar, this is the world leader in high pressure parallel chemistry. Ease of use, compact design, with a wide range of features including sampling under pressure.

Read more
.
Simular // Heat-Flow Reaction Calorimeter with on-line result display
Simular // Heat-Flow Reaction Calorimeter with on-line result display

The Simular is a reaction calorimeter based around stirred and jacketed reaction vessels. It is a high specification automated chemical reactor with special features that enable rate of heat release from the reaction being performed, to be obtained. This information enables easier and faster scale up of reactions, safety parameters to be cacluated so that accidents can be prevented and has a user interface that makes it accessible to both research chemists and safety experts alike.

Read more
.
TSu // Thermal Screening Unit for explosion hazards liquids and powders
TSu // Thermal Screening Unit for explosion hazards liquids and powders

Early screening of thermal stability of liquids and powders can be reliably performed in The Thermal Screening Unit (TSu). This can be regarded a replacement for screening by classical DSC/DTA methods with the added advantage of pressure measurement, larger sample and if necessary agitation of sample.

Read more
.
Phi-TEC I // Adiabatic Reaction Calorimeter
Phi-TEC I // Adiabatic Reaction Calorimeter

The Phi-TEC I is a computer-controlled adiabatic calorimetery system that can be used to determine the heat evolved and pressure developed during an uncontrolled exothermic runaway reaction. It is the modern alternative to the classic "ARC" developed by Dow Chemicals and compared to other "ARC" systems, it has unique control features that make it easy to use, provide excellent results and use up only a fraction of the laboratory space.

Read more
.
Phi-TEC II // Adibatic Calorimeter for vent sizing and accurate thermal runaway testing
Phi-TEC II // Adibatic Calorimeter for vent sizing and accurate thermal runaway testing

The Phi-TEC II is a low PHI-factor (or low thermal inertia) adiabatic calorimeter with the capability of accurately simulating the behaviour of a large-scale chemical reactor under conditions virtually identical to a large-scale plant, while using only 10-100mL of sample. Since it simulates closely larger scale plant, it is often used to size relief vents to protect against thermal runaway, including venting two-phase vapour liquid relief.

 

Read more
.
 BTC // Adiabatic Battery Testing Calorimeter
BTC // Adiabatic Battery Testing Calorimeter

This is a safety calorimeter designed to test safety problems of thermal runaway initiated by high temperature, overdischarge (too high current) and overcharging (too high voltage). It can be used to test large and small Li-ion & similar other high energy batteries and components. The BTC is based on the same principle as "ARC-type" (TM) adiabatic calorimeters - which is proven to be the correct platform for more than 30 years in the chemical industry.

Read more
.
LP ChemSCAN // Precise Reaction-Control on an XYZ Robot platform
LP ChemSCAN // Precise Reaction-Control on an XYZ Robot platform

The LP ChemSCAN (LPCS) combines intelligent robotic liquid handling with the versatility of a multipot reaction block. The block provides independent heating and stirring on 4 or 8 zones and the robot extends this functionality - allowing for literally hundreds of manual experiments to be condensed into a single expt on a single platform.

Read more
.
MicroNOTE // Touchscreen Datalogger/controller for Chemical Reactors
MicroNOTE // Touchscreen Datalogger/controller for Chemical Reactors

Control reaction stirring, temperature, dosing and pH with MicroNOTE provides a low-cost "Command and Control" solution for laboratory reactors of all kinds. Using HEL's intuitive WinTOUCH control software on a low-profile touchscreen PC with Command, Datalogging and Safety protocols built-in.

Read more
.
Crystal Eyes // Automated solubility monitoring unit
Crystal Eyes // Automated solubility monitoring unit

HEL's Crystallisation screening tool Crystal Eyes incorporates a custom-designed NIR turbidity probe for the monitoring of solubility and MSZW - Available as a stand-alone, hand-held unit, or fully integrated into a stirred vessel with temperature control.

Read more
.
On-line  heat flow Calorimetry // Simple Reaction Calorimetry data for non-specialists
On-line heat flow Calorimetry // Simple Reaction Calorimetry data for non-specialists

On-Line Calorimetry enables approximate heat flow data to be produced from standard jacketed reactors, rather than special calorimeters. The heat release being measured is displayed on-line, as the reaction proceeds and requires no knowledge of calormetery or calcuation by the user. The data enables easier scale up and an understading of hazard potential.

Read more
.
ASu // Automated Sampling Unit
ASu // Automated Sampling Unit

The ASu is a 6-position autosampling unit. Operated either by keypad or via PC control - the system is ideal for safe and easy automated removal of multiple liquid or slurry samples, from any size reactor.

Read more
.
Advanced PAT // Process Analytical Technologies
Advanced PAT // Process Analytical Technologies

PAT delivers real-time monitoring of active chemistry. With in-line PAT integrated into HEL's WinISO control software, chemistry-driven control loops become possible - adding a new dimension to process control and optimisation.

Read more
.
Subsieve AutoSizer // Automated Fisher Number (FSSS) Particle-Sizing System
Subsieve AutoSizer // Automated Fisher Number (FSSS) Particle-Sizing System

A complete update on a venerable workhorse, the SAS supercedes the Fisher Sub-Sieve Sizer (FSSS), widely used in many industries as a critical particle-sizing QC tool. The SAS employs modern electromechanics and a simple touchscreen interface to bring Fisher number (air-permeability particle sizing) measurements into the 21st century.

Read more
.